CB-5000, Waste Oil Furnace, Used Oil Furnace, Furnace, Clean Burn, Model CB-5000, 500,000 BTU/hr.


The Clean Burn CB-5000 is the largest waste oil furnace the EPA allows. No other unit is as robust and reliable for extracting free heat from waste oils. The CB-5000, which generates approximately 500,000 BTU/hr, is the choice for large repair and service facilities with multiple bays where larger quantities of waste oil are generated and/or collected. A Clean Burn Distributor is the expert you want for furnace selection and installation.


 Engineered from the ground up to burn waste oils

Patented heat exchanger generates more heat

Unique non-welded flue tubes for longer service life

Advanced burner preheats oil to optimize combustion

Swing-away burner and door make service easy

Longest cleaning interval of all units in its class

Lower stack temperatures, higher heat output

Automatic flow control means no fuel adjustment required

Ideal for unit heating or with a Clean Burn Recycling Center

Unequaled service and support from Clean Burn Distributors

Model CB-5000 Specs.
*Maximum BTU/hour 500,000 (147 kW)
*Maximum oil consumption 3.3 GPH (12.5 L/h)
Fuels Used oils: Crankcase,ATF, hydraulic
Fuel oils: #2, #4, and #5 fuel oil
Air flow output (CFM) Unit heater 5500
Central furnace (ducted)
0.25 SPWC (in.) 5200
0.30 SPWC (in.) 5000
*Air compressor required 2.5 CFM @ 25 PSI
(4.25 m3/h @ 1.7 bar)
Stack Size 10 inch dia.(25cm dia.)
Furnace Dimensions, Assembled 78” L x 38 W x 73 H
(198cm x 97cm x 185cm)
Approx. Weight (uncrated) 1036 pounds (470 kg)
Electrical Requirements 230 VAC 60 Hz, single phase
30 A circuit breaker

*Values indicated above are nominal. Actual values will vary depending on fuel and installation.


CB-5000 User Manual

International Manual

CB-5000 Bid Specs

Contact Us

For general questions, comments, or requests, please fill out the form. For parts/service, please call 888-817-5997

Not readable? Change text. captcha txt